332.00 €
×
Print or save as PDF
You will be redirected to your browser's interface for printing and saving as a PDF.
Choose the option that's best for you from the "Destination" drop-down menu.
Availability details
830108 · CoolCell 15 x cryotubes 5 ml
Available quantity : 0
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.
830108 · CoolCell 15 x cryotubes 5 ml
• Freezing system without alcohol or refrigerant, no extra cost, no maintenance, no waste
• Cells Freezing at -1 °C/minute when placed in a freezer at -80 °C
Compatible with all cell types (stem cells, primary cells, PBMC, insect cells, yeast, and others)
• Thermally conductive alloy core and insulating outer coating for constant cooling and high reproducibility
• Symmetrical design, uniform tube freezing
• Can be used after only 5 minutes
• All tube slots must be filled for homogeneous freezing
Additional information:
• The insulating coating and the thermally conductive core ensure the evacuation of the heat emitted by the tubes throughout the freezing period
• Bevelled design lid for easy opening and access to the top of the tubes
• When the cover is removed the top of the tubes are visible for easy identification and handling of the tubes
• Numbered Wells
• Combination of polyurethane foam, solid body, and symmetrical tube holder
• The polyurethane foam prevents the temperature inside the freezer from rising, thus protecting neighbouring samples
• Cells Freezing at -1 °C/minute when placed in a freezer at -80 °C
Compatible with all cell types (stem cells, primary cells, PBMC, insect cells, yeast, and others)
• Thermally conductive alloy core and insulating outer coating for constant cooling and high reproducibility
• Symmetrical design, uniform tube freezing
• Can be used after only 5 minutes
• All tube slots must be filled for homogeneous freezing
Additional information:
• The insulating coating and the thermally conductive core ensure the evacuation of the heat emitted by the tubes throughout the freezing period
• Bevelled design lid for easy opening and access to the top of the tubes
• When the cover is removed the top of the tubes are visible for easy identification and handling of the tubes
• Numbered Wells
• Combination of polyurethane foam, solid body, and symmetrical tube holder
• The polyurethane foam prevents the temperature inside the freezer from rising, thus protecting neighbouring samples
Suggested application(s)Cryopreservation and ultra-low temperature storage, Lyophilization and long-term storage
Gross weight0,26 kg
ColourViolet
height145 mm
diameter95 mm
Dimensionsø wells: 15.2 mm
Gross dimensions20,00 x 16,00 x 13,50 cm
UNSPSC Code41100000
Source : Biocision
830108 - User manual830108 - Manufacturer data sheetApplication note - Corning® products effective for 3D cultureApplication note - Cryopreservation of Corning® animal cellsApplication note - Coolcell publicationsAccessories
Variant(s)
• Economic version
• High base, no top visibility of the tube
• The insulating coating and the thermally conductive core ensure the evacuation of the heat emitted by the tubes throughout the freezing period
• Bevelled design lid for easy opening and access to the top of the tubes
• When the cover is removed the top of the tubes are visible for easy identification and handling of the tubes
• Numbered Wells
• Combination of polyurethane foam, solid body, and symmetrical tube holder
• The polyurethane foam prevents the temperature inside the freezer from rising, thus protecting neighbouring samples
• Controlled micro-convection technology allows the cold air from the freezer to enter evenly at -80 °C through a vent at the bottom base of the box. The cold air disperses
evenly around each vial. The hot air is released from the vials and evacuated through an upper ventilation opening
• Holder for 30 cryotubes easily removable
• The polyurethane foam prevents the temperature inside the freezer from rising, thus protecting neighbouring samples
• The insulating coating and the thermally conductive core ensure the evacuation of the heat emitted by the tubes throughout the freezing period
• For 2 ml (Model SV2) and 5 ml (Model SV10) serum vials
• When the lid is removed the top of the tubes is visible for better identification and handling of the tubes
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.