Additional description• Module PELTIER (TM-PE-C32)
• Heat exchanger
• Cut CCB25 DIN
• Rotor CC25 DIN
• Insert for tray and cone geometries
• 1 mm thickness shim
• Air gap adjustment tool
• P35 rotor
• Bearing type: ball bearing
• Measurement mode:
- In rotation: controlled rate (CR)/ controlled stress (CS)
- In oscillation: controlled deformation (CD) / controlled stress (CS)
- Angular velocity range: 0.001 rad/s – 157 rad/s - 0.01 rpm – 1500 rpm
- Angular resolution: 1.25 µrad
- Torque range: 0.2 mNm – 100 mNm
- Torque resolution: 0.01 mNm
- Shear stress range: 0.7 Pa – 63660 Pa
- Shear rate range: 0.004 s-1 – 11415 s-1
- Frequency range: 0.1 Hz – 20 Hz
- Minimum deformation angle: 10 µrad
• Viscosity range:
- In rotation: 0.001 Pa·s – 600000 Pa·s
- In oscillation: 5 Pa·s and larger
- Measurement geometry: coaxial cylinders, double-gap cylinder, parallel plates, cones, and vane rotor
• Interfaces :
- TCP/IP-Ethernet for communication with PC
- 3 x USB
