428.00 €
×
Print or save as PDF
You will be redirected to your browser's interface for printing and saving as a PDF.
Choose the option that's best for you from the "Destination" drop-down menu.
Availability details
074208 · Combined pH electrode Schott type 6000BNC
Available quantity : 0
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.
074208 · Combined pH electrode Schott type 6000BNC
Connections:
• for the electrode with integrated T° sensor A 157, a connection with multiple contacts called ''SMEK'' is necessary. 1 m and 3 m cables are available for DIN or BNC plug devices;
• for the electrodes without T° integrated, there are models with moulded cable and screw head models. The moulded cables are available according to the table with a DIN or BNC plug. The screw heads have to be completed by a ''L plug'' cable with a DIN or BNC plug. The ''L plug'' corresponds to what users often refer to as ''S 7'' or ''S''.
Features of the SCHOTT Instruments electrodes:
• all these models are filled with an electrolyte liquid: KCl 3 mol/l solution;
• the Platinum wire junction (illustration below) offers a better circulation of the KCI solution than a ceramic junction. There is virtually no clogging and it prevents products entering the electrode's reference compartment. All this contributes to a greater life of the electrode. It is advisable to always leave the filler cap open, even between measurements. While ensuring that the level of KCI solution is maintained, it will cause a light but steady flow which cleans the junction.
• Rod made from silver, silver chloride, glass
• Zero point: pH = 7.0; +/- 0.3
• Type of membrane glass: A
• Head connection cable: e.g. LS 1 ANN and for head plug: e.g. 1 ANN
• Fixed cable: 1 m with plug A and DIN 19262 or with BNC plug
• Temperature range: - 5 °C to + 100 °C
• pH range: 0 to 14
• for the electrode with integrated T° sensor A 157, a connection with multiple contacts called ''SMEK'' is necessary. 1 m and 3 m cables are available for DIN or BNC plug devices;
• for the electrodes without T° integrated, there are models with moulded cable and screw head models. The moulded cables are available according to the table with a DIN or BNC plug. The screw heads have to be completed by a ''L plug'' cable with a DIN or BNC plug. The ''L plug'' corresponds to what users often refer to as ''S 7'' or ''S''.
Features of the SCHOTT Instruments electrodes:
• all these models are filled with an electrolyte liquid: KCl 3 mol/l solution;
• the Platinum wire junction (illustration below) offers a better circulation of the KCI solution than a ceramic junction. There is virtually no clogging and it prevents products entering the electrode's reference compartment. All this contributes to a greater life of the electrode. It is advisable to always leave the filler cap open, even between measurements. While ensuring that the level of KCI solution is maintained, it will cause a light but steady flow which cleans the junction.
• Rod made from silver, silver chloride, glass
• Zero point: pH = 7.0; +/- 0.3
• Type of membrane glass: A
• Head connection cable: e.g. LS 1 ANN and for head plug: e.g. 1 ANN
• Fixed cable: 1 m with plug A and DIN 19262 or with BNC plug
• Temperature range: - 5 °C to + 100 °C
• pH range: 0 to 14
Suggested application(s)Potentiometry, pH and conductivity measurements
Additional descriptionDiaphragm: platinum
Membrane: ball
Membrane: ball
DimensionsL: 96
DimensionsØ (mm): 3
UNSPSC Code41110000
Item subject to a restricted return policy.Click here for more information
Accessories
Variant(s)
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.