172.00 €
×
Print or save as PDF
You will be redirected to your browser's interface for printing and saving as a PDF.
Choose the option that's best for you from the "Destination" drop-down menu.
Availability details
036512 · Capsule Filter Polycap 75 TC with dome PES membrane filtration threshold 0.2 / 0.2 µm Whatman
Available quantity : 0
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.
036512 · Capsule Filter Polycap 75 TC with dome PES membrane filtration threshold 0.2 / 0.2 µm Whatman
Polycap TC: for the safe and efficient filtration of biological solutions and tissue culture media.
The capsule incorporates two layers of PES membrane, naturally hydrophilic, low extractable levels and with high specific flow rates. PES membranes are also known for their low protein binding making them ideal for the filtration of sensitive biological solutions. The capsules are supplied pre-sterilised by gamma rays and have air vents to optimise the filtration surface by avoiding trapping air. The capsule output is protected to avoid contact during installation and has ribbed connections for standard pipes. Some models are also available with NPT threaded connections as well as with filling bells.
* Ribbed: ribbed end for pipes with an inner diameter of 6 to 10 mm; 1/2'' Ribbed: ribbed end for pipes with an inner diameter of 10 to 12 mm; MNPT: Male National Pipe Thread
Applications:
• Aqueous pharmaceutical solutions
• Culture media
• Reagent preparation
• Viral suspensions
• Solutions for particle counting
• Cleaning or rinsing solutions
The capsule incorporates two layers of PES membrane, naturally hydrophilic, low extractable levels and with high specific flow rates. PES membranes are also known for their low protein binding making them ideal for the filtration of sensitive biological solutions. The capsules are supplied pre-sterilised by gamma rays and have air vents to optimise the filtration surface by avoiding trapping air. The capsule output is protected to avoid contact during installation and has ribbed connections for standard pipes. Some models are also available with NPT threaded connections as well as with filling bells.
* Ribbed: ribbed end for pipes with an inner diameter of 6 to 10 mm; 1/2'' Ribbed: ribbed end for pipes with an inner diameter of 10 to 12 mm; MNPT: Male National Pipe Thread
Applications:
• Aqueous pharmaceutical solutions
• Culture media
• Reagent preparation
• Viral suspensions
• Solutions for particle counting
• Cleaning or rinsing solutions
ModelPolycap 75 TC with bell jar
SterileYes
SterilitySterilised by gamma radiation
MaterialMembrane: PES
Gross weight0,19 kg
Additional descriptionFiltration threshold: 0.2 / 0.2 µm / Flow rate at 1 bar (14.5 psi): 11.5 l/min
Inlet connection and outlet connection: barbed (barbed fitting for hoses with 6 to 10mm inner diameter)
Vent: yes
Inlet connection and outlet connection: barbed (barbed fitting for hoses with 6 to 10mm inner diameter)
Vent: yes
SpeedFlow rate: 11.5 l/min (at 1 bar)
DimensionsFiltration area: 1100 cm²
Gross dimensions7,50 x 7,50 x 28,00 cm
UNSPSC Code41104908
036512 - Manufacturer data sheetVariant(s)
You may be also interested in these categories
Filter paperMembrane filterSyringe filterFiltration funnelFiltration unitFiltration systemFilter capsuleFiltration plateAccessory for filtrationSyringe-less filter for HPLCFiltration manifoldFiltration supportBüchner funnelPre-filterVent filterVacuum vialQualitative analytical filter paperComplete filtration systemExtraction cartridgeComplete filtration unitGeneral-purpose paperAccessory for filtration systemReceiver flask for filtration unitFibreglass paperQuartz fibre paperGermination paperFiltration fabricJoseph paperQuantitative analytical filter paper
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.