191.00 €
×
Print or save as PDF
You will be redirected to your browser's interface for printing and saving as a PDF.
Choose the option that's best for you from the "Destination" drop-down menu.
Availability details
036456 · Protection filter Vacu-Guard 150 desiccant Whatman
Available quantity : 0
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.
036456 · Protection filter Vacu-Guard 150 desiccant Whatman
For the protection of systems under vacuum or pressure to reduce the risk of exposure to hazardous vapors
0.2 µm PTFE membrane providing >99.99% retention of airborne particles ≥0.1 µm in size
Available media:
• activated carbon: very high porosity for adsorption of odors carried by gases and vapors
• molecular sieve: crystalline aluminosilicate media for gas drying and retention of molecules up to 4 Å
• desiccant: anhydrous calcium sulfate media impregnated with calcium chloride. Inert toward most reagents other than water. Enables very rapid drying due to high adsorption capacity. The media does not swell, shrink, or disintegrate during use. The media changes from blue to pink when the capsule is saturated
0.2 µm PTFE membrane providing >99.99% retention of airborne particles ≥0.1 µm in size
Available media:
• activated carbon: very high porosity for adsorption of odors carried by gases and vapors
• molecular sieve: crystalline aluminosilicate media for gas drying and retention of molecules up to 4 Å
• desiccant: anhydrous calcium sulfate media impregnated with calcium chloride. Inert toward most reagents other than water. Enables very rapid drying due to high adsorption capacity. The media does not swell, shrink, or disintegrate during use. The media changes from blue to pink when the capsule is saturated
ModelVACU-GUARD 150 Desiccant
MaterialMedia: PTFE
Gross weight0,52 kg
Additional descriptionChemistry: anhydrous calcium
Specific flow rate (SLPM) at 0.1 bar: 280 / Specific flow rate (SLPM) at 0.5 bar: 600
Specific flow rate (SLPM) at 0.1 bar: 280 / Specific flow rate (SLPM) at 0.5 bar: 600
Ambient conditionsMaximum operating pressure:
• Dry gas: 4 bar
• Wet gas: 1 bar
• Dry gas: 4 bar
• Wet gas: 1 bar
Gross dimensions7,50 x 7,00 x 28,50 cm
Weight318 g
UNSPSC Code41104908
036456 - Manufacturer data sheetProduct(s) associated with this accessory
For protecting vacuum pumps to prevent damage to the essential components in case of liquid backflow. The filter body is made from pure polypropylene and incorporates a PTFE membrane.
You may be also interested in these categories
Filter paperMembrane filterSyringe filterFiltration funnelFiltration unitFiltration systemFilter capsuleFiltration plateAccessory for filtrationSyringe-less filter for HPLCFiltration manifoldFiltration supportBüchner funnelPre-filterVent filterVacuum vialQualitative analytical filter paperComplete filtration systemExtraction cartridgeComplete filtration unitGeneral-purpose paperAccessory for filtration systemReceiver flask for filtration unitFibreglass paperQuartz fibre paperGermination paperFiltration fabricJoseph paperQuantitative analytical filter paper
The stock indication is not contractual: this data is constantly changing and may vary depending on the quantities requested.