
###############################################################################################
##                                         READ ME
###############################################################################################
##
##  1.) Anything start with '#' will be treated as comment until next new line.
##  2.) Everything will be removed in Ship-Build.
##  3.) Option with 2 or more parameters must contain a 'space' in between each parameter.
##  4.) Do not put 2 or more options at the same line. Make sure 1 option only at each line 
##      with Carriage Return & Line Feed (done by pressing 'enter' on keyboard).
##  5.) BOOLEAN type is use to enable/disable the option.
##  6.) FLOAT type is use to enter floating point parameter to the option.
##  7.) INTEGER type is use to enter integer parameter to the option.
##
###############################################################################################



## BOOLEAN type. Main control to on(1)/off(0) whole options.
TestOpt=1


## FLOAT type. Ramp up/down rate and offset. 4 parameters with ramp-up-rate, ramp-up-offset,
## ramp-down-rate and ramp-down-offset respectively. 
#RampRate=3.0 0 4.5 0.0


## BOOLEAN type. Enable the logging of data into a file, \Hard Disk\temptimelog.txt
LogFile=1


## FLOAT type. Equation y=mx+c for temperature offset, 2 parameters with m and c respectively.
## This option and "TempOffsetTable" is mutually exclusive but has the higher priority.
## i.e. If this is on then "TempOffsetTable" will be automatically off in the background.
#TempOffsetEquation=22.0 33.4


## BOOLEAN type. Read the temperature offsets from a file \Hard Disk\tempoffset.txt if 
## "TempOffsetEquation" is comment out/has no parameter, and this option set to 1.
#TempOffsetTable=1


## INTEGER type. 3 parameters with Proportional, Integral and Derivative respectively.
#PidParm=23 45 67

#Cerdisp=1

#HeatedLid=1.0

#HT_RT_Offsetoff=1;

SelfDiagOff=0

ThermBlockOff=0

FwHardcodeOff=0

#RealGraphDisp=1

#HotPlugDetOff=1

FlexiHotTopEn=0

IndiLEDCalEn=1

CartShiftCoefEn=1

Fan24Volt=1

#TestOpt
#RampRate
#LogFile
#TempOffsetEquation
#TempOffsetTable
#PidParm
#Cerdisp
#HeatedLid
#SelfDiagOff
#ThermBlockOff
#FwHardcodeOff
#RealGraphDisp
#HotPlugDetOff
#Fan24Volt

#FpgaPid

ThermBlockId=33


###############################################################################################
##                                         End of file
###############################################################################################
